Connecting cables

Serial PC-cable for 5020

  • serial PC-cable for FLYTEC 5020
  • item no. 41200

Previous connecting cables

  • serial PC-cable 9-pole for series 4000
    item no. 41000
  • serial printer cable 25-pole for series 4000
    item no. 41010
  • parallel printer cable Centronics for series 4000
    item no. 41020
  • GPS connecting cable E-series-FLYTEC 4030
    item no. 41060

Serial PC-cable for 5030

  • serial PC-cable for FLYTEC 5030
  • item no. 41090

Previous connecting cables

  • serial PC-cable 9-pole for series 4000
    item no. 41000
  • serial printer cable 25-pole for series 4000
    item no. 41010
  • parallel printer cable Centronics for series 4000
    item no. 41020
  • GPS connecting cable E-series-FLYTEC 4030
    item no. 41060

Serial PC-cable for 6010, series 1

  • serial PC-cable for FLYTEC 6010, series 1
  • item no. 41300

Previous connecting cables

  • serial PC-cable 9-pole for series 4000
    item no. 41000
  • serial printer cable 25-pole for series 4000
    item no. 41010
  • parallel printer cable Centronics for series 4000
    item no. 41020
  • GPS connecting cable E-series-FLYTEC 4030
    item no. 41060

PC-cable USB for 60xx

  • PC-cable USB for FLYTEC 60xx
  • item no. 20237

Previous connecting cables:

  • serial PC-cable 9-pole for series 4000
    item no. 41000
  • serial printer cable 25-pole for series 4000
    item no. 41010
  • parallel printer cable Centronics for series 4000
    item no. 41020
  • GPS connecting cable E-series-FLYTEC 4030
    item no. 41060

Extension cable 1.2 m to vane wheel sensor

  • extension cable 1.2 m to vane wheel sensor (HF-suppressed)
  • item no. 41040

USB-Serial Converter

By using the USB-serial converter adapter, the FLYTEC Variometers of series 4000, 5000 and 6000 may communicate via the USB interface of the computer with the Flychart software. For the 5030 it is possible to download the flights, however it is not possible to perform an instrument configuration.

Important: for previous connecting cables (series 4000) it is required for correct functioning  to have a jumper soldered at the RS232 connector between pin 7 and 8. (see relevant drawing at bottom).

Information for 5030 users:

for the FLYTEC 5030 a special USB-serial converter is available. By use of this special version it is possible to transmit the firmware to the 5030. The driver is the same model as for the standard version. 
Please require when ordering the USB-serial converter having item no.: 20227.

Technical data:

  • compatible with USB specification v1.1/2.0
  • supports all conventional serial RS232 ports
  • automatic USB-protocol handling
  • Bus-power support, no external power supply required
  • compatible with Windows 95 OSR 2.1
  • Windows 98SE/ME/2000/NT/XP/Vista/Win7

Scope of supply:

the USB-serial converter is delivered in transparent blister packaging, comprising the USB-serial converter, as well as one USB-PC connecting cable providing data transfer rate of over 1Mbps.

USB/serial converter standard 40xx / 5020 / 6010 / Series_1 > item no. 20226
USB/serial converter for FLYTEC 5030 > item no. 20227.

Connecting cable Variometer – PC

On older instruments of series 4000 the interconnecting bridge between pin 7 and 8 is not yet fitted. Therefore please check the cable before using the USB-serial converter for the first time. Without presence of such interconnecting bridge the converter might possibly have a malfunction.

tl_files/media/products/accessories/verbindungskabel/usb-seriell-wandler/rs-pc_kabel.gif

(click on picture for enlarged view)